[To be provided]    +86 18915067107
2026-10-27 3

Construction Machinery

Construction Machinery

Construction sites expose machinery to shock loads, high ambient temperatures and fine dust. XINYE TURBO turbochargers are built with heavy-duty bearing housings, upgraded seal systems and high-temperature alloys to survive these severe conditions.

Severe duty as the design baseline

An excavator does not cruise. It digs, lifts and swings against hydraulic pressure that loads the engine in hard steps, all day, in ambient temperatures that can pass 45 degrees Celsius and at altitudes where air density falls away. We size the compressor for the altitude and temperature the machine will actually work in, and we choose bearing and seal systems for that load pattern rather than for a steady-state test bench cycle.

  • Crawler and wheeled excavators, from compact 1.5 tonne units to large earthmoving machines
  • Wheel loaders, backhoe loaders, bulldozers, graders and compaction equipment
  • Crushers, screeners, concrete pumps, piling rigs and drilling equipment
  • Site generator sets and air compressors driven by industrial diesel engines

Holding up under shock and vibration

Shock loading and machine vibration are the two mechanisms that end turbocharger life early on construction equipment. Our heavy-duty bearing housings, upgraded seal systems and high-temperature alloys are selected to survive these conditions, and mounting interfaces follow the original design so the assembly does not introduce new resonance into the machine.

On the exhaust side, we allow for the thermal cycling that comes from repeated full-load and idle transitions. Clearances are set so that the turbine does not rub at maximum temperature, and heat shielding is provided where the installation places the unit close to hydraulic lines or sound insulation.

Fuel efficiency and emissions on site

Our turbochargers help excavators, wheel loaders, graders and compact construction equipment achieve better fuel efficiency and lower emissions while delivering the power needed for digging, lifting and hauling operations. Correct boost pressure also keeps exhaust after-treatment systems working in their design window, which reduces regeneration frequency and the downtime that comes with it.

Support for manufacturers and dealers

With complete machining and assembly capabilities, we support OEM development, spare part supply and aftermarket programs for construction machinery manufacturers and dealers worldwide. That includes prototype and validation parts, production supply against schedule, and replacement units cross-referenced to the numbers already used in the field.

Share the engine model, rated power, altitude and ambient conditions of the machine, and we will confirm the specification that gives the best margin for your duty cycle.


WhatsAppWhatsApp
SkypeSkype
E_mailMail
Inquiry